Leading Recruitment Service Provider for DATA CENTER, EPC, OEM, PMC, ENERGY, POWER & ELECTRICAL, AEC
Ralicomm Logo
altjobs-group
Ralicomm Logo

Power & Electrical

Core Areas of Expertise

  • Business Development / Pre-Bid & Proposal
  • Estimation & Costing
  • Tendering & Contracting
  • Project Management / PMO / PMC
  • Project Controls – Planning, Scheduling & Cost Control
  • Engineering & Design
  • Supply Chain & Procurement
  • Construction Management
  • Build & Installation
  • QA/QC – Quality Assurance & Quality Control
  • HSE / EHS / Safety & Compliance
  • Pre-Commissioning & Testing
  • Commissioning & Start-Up

Specialized Hiring Solutions for

ELECTRICAL & POWER SYSTEMS
(LV, MV, HV & EHV-UPTO 765kV AC, 800kV DC)

AIS & GIS SUBSTATIONS
AC & DC TRANSMISSION AND DISTRIBUTION

PROTECTION, AUTOMATION & CONTROL
SCADA, EMS, DMS, DCS, PLC & RTU

ELV & LOW-CURRENT SYSTEMS
ELECTRICAL, CIVIL & STRUCTURAL INFRASTRUCTURE

RENEWABLE ENERGY, GRID INTEGRATION & BESS

Electrical_power_system

Electrical & Power Systems Hiring Solutions Across

  • Power Generation & Plant Electrification
  • Renewable Energy & Energy Storage
  • Transmission & Distribution
  • AIS & GIS Substations
  • Grid & Electrical Infrastructure
  • Industrial Electrification
  • Utilities & Power Networks
  • Protection, Automation & Control Systems
  • SCADA & Grid Digitalization
  • Data Center & Critical Power
  • EV Charging & E-Mobility Infrastructure
  • EPC, Engineering & Project Execution
  • Testing, Commissioning & O&M
  • High-Voltage (HV/EHV) Systems
  • MEPF ( Mechanicla, Electrical, Plumbing, Fire Protection)
electrical_standards

Electrical Standards & Codes

IS / BIS – Indian Standards / Bureau of Indian Standards (India)

IEC – International Electrotechnical Commission (International)

IEEE – Institute of Electrical and Electronics Engineers (International)

NEC / NFPA – National Electrical Code / National Fire Protection Association (USA)

ANSI – American National Standards Institute (USA)

NEMA – National Electrical Manufacturers Association (USA)

ASTM International – Materials, Testing & Performance Standards (International)

UL Standards – Underwriters Laboratories Standards (USA)

ISO – International Organization for Standardization (International)

BS / BS EN – British Standards / British-Adopted European Standards (UK)

CENELEC / EN – European Electrotechnical Standards (Europe)

IECEx / ATEX – Hazardous Area & Explosion Protection Requirements (International / Europe)

CEA Regulations – Central Electricity Authority Regulations (India)

CERC / SERC Regulations – Central / State Electricity Regulatory Commission Requirements (India)

Grid Codes & Utility Standards – National & Regional Requirements

DIN / VDE – German Standards / Association for Electrical, Electronic & Information Technologies (Germany / Europe)

JIS – Japanese Industrial Standards (Japan)

AS / AS-NZS – Australian / Australian-New Zealand Standards (Australia / New Zealand

API – American Petroleum Institute Standards (USA / International)

ISA – International Society of Automation Standards (International)

BICSI – Telecommunications & Data Center Infrastructure Standards (International)

TIA – Telecommunications Industry Association Standards, including TIA-942 (USA / International)

Uptime Institute – Data Center Tier & Infrastructure Standards (International)

ASHRAE – American Society of Heating, Refrigerating and Air-Conditioning Engineers Standards (International)

CIGRE – International Council on Large Electric Systems Technical Standards & Guidelines (International)

NERC – North American Electric Reliability Corporation Standards (North America)

CSA – Canadian Standards Association Standards (Canada / International)

BIS / IS-IEC – Indian Standards based on IEC Standards (India)

Project-Specific Client & EPC Standards – Employer, Utility & Owner Specifications / Project Specifications

EPC

Business Development / Pre-Bid & Proposal

  • Client requirements / RFQ analysis
  • Technical & commercial proposal
  • Bid strategy and approvals
  • Preliminary feasibility

Estimation & Costing

  • Conceptual and detailed cost estimation
  • BOQ development
  • Cost estimation of core systems: Electrical
    Mechanical
    Civil & structural works
    ELV Systems
  • CAPEX budgeting and cost baseline development
  • Unit rate analysis and benchmarking against industry standards
  • Life Cycle Costing (LCC) and OPEX estimation
  • Value engineering for cost optimization
  • Cost impact analysis for design changes and scope variations
  • Financial feasibility analysis and project cost forecasting
  • Risk-based contingency planning for procurement and execution uncertainties

Tendering & Contracting

  • Development of tendering strategy and procurement packaging
  • Preparation of RFQ/RFP documents
  • Issuance of tenders to prequalified vendors and OEMs
  • Pre-bid meetings, technical clarifications, and addendum management
  • Management of bid submission process and compliance tracking
  • Evaluation of technical bids (design compliance, redundancy, scalability, SLA requirements)
  • Coordination of techno-commercial evaluations with engineering and finance teams
  • Preparation of bid comparison statements (BCS)
  • Negotiation support and finalization of preferred vendors
  • Recommendation for award based on technical and commercial evaluation
Monitor

Project Management & Control

Project Planning & Scheduling

Project Controls & Cost Management

Progress Monitoring & Reporting

Risk & Change Management

Resource & Document Management

Procurement & Contract Coordination

Baseline Preparation & Schedule Updates

Earned Value Management (EVM)

Interface & Stakeholder Coordination (client, PMC, vendors, contractors)

Delay Analysis & Recovery Planning

Quality & Safety Compliance Monitoring

Claims & Variation Management Support (contractual control function)

Power_syste_analysis_design

Engineering & Design

Engineering Design Tools

  • AutoCAD / AutoCAD Electrical
  • EPLAN Electric P8
  • Zuken E3.series
  • SolidWorks Electrical
  • Autodesk Revit (Electrical BIM)
  • Navisworks (BIM coordination & clash detection)
  • Microsoft Visio (SLDs, schematics, logic diagrams)

Power System Studies & Engineering Analysis

  • ETAP
  • DIgSILENT PowerFactory
  • PSS®E (Transmission system studies)
  • PSCAD / EMTDC
  • SKM Power Tools
  • OpenDSS (Distribution systems & smart grid studies)
  • MATLAB / Simulink (advanced analysis & modeling)

Lighting Design Tool

  • DIALux evo

Engineering & Design

  • Electrical Systems Engineering
  • Electrical Systems Integration
  • Electrical Application Engineering
  • Detailed Engineering & Design
  • Power System Studies & Analysis
  • Protection & Relay Coordination Studies
  • Load Flow, Short Circuit & Stability Studies
  • Earthing & Lightning Protection Design
  • Cable Engineering & Routing
  • Hazardous Area Electrical Engineering
  • HV/EHV Transmission Systems
  • Transmission Line Engineering
  • GIS/AIS Substations
  • Substation & Switchyard Engineering
  • MV/LV Distribution Systems
  • Grid Interconnection & Synchronization
  • Smart Grid Solutions
  • HVDC & FACTS Systems
electrical_energy_sources

Engineering & Design

  1. Industrial Electrification
  2. Plant Electrical Systems
  3. Utility & Infrastructure Power Systems
  4. DG & Backup Power Systems
  5. Electrical Balance of Plant (EBoP)
  6. Energy Management Systems
  7. Renewable Energy Integration
  8. Solar Power Plant Electrical Systems
  9. Battery Energy Storage Systems (BESS)
  10. Hybrid Power Systems
  11. SCADA & Automation Systems
  12. Protection & Control Systems
  13. Instrumentation & Control (I&C)
  14. Integrated Automation Solutions
  15. Lighting Systems
  16. E-House (Electrical House / Modular Electrification Enclosures)
  17. Engineered Building Solutions (EBS)

Engineering & Design

  1. Single-Line & Three-Line Diagrams (SLD/TLD)
  2. Protection & Control Schematics
  3. Schematic & Wiring Diagrams
  4. Functional & Logic Diagrams, Interconnection Diagrams,
  5. Block Diagrams,
  6. General Arrangement (GA) Drawings
  7. Equipment & Electrical Layout Drawings
  8. Substation & Switchyard Layouts
  9. Cable Routing & Tray Layouts
  10. Cable Schedules & Interconnection Schedules
  11. Earthing & Lightning Protection Layouts
  12. Illumination & Lighting Layouts
  13. Control Panel & Marshalling Kiosk Design
  14. Relay & Protection Panel Design
  15. Electrical Bill of Materials (EBOM)
  16. Material Take-Off (MTO)
  17. Electrical Component Libraries
  18. Terminal Plans & Wiring Schedules
  19. As-Built Drawings & Documentation
  20. Design Verification & Compliance Documentation
  21. Standards Compliance Documentation
  22. Engineering Change Management (ECN/ECR)
  23. Testing & Commissioning Documentation
Transmission_Distribution

Engineering & Design

AC, DC Transmission & Distribution (T&D) Systems

  1. Overhead Transmission Line Engineering (MV/HV / EHV / UHV)
  2. Distribution Line Engineering (HT / LT Networks)
  3. Route Survey & Alignment Studies (Topographical & GIS Mapping)
  4. Tower / Pole Location & Spotting Studies
  5. Tower Design (Lattice / Monopole / Compact Structures)
  6. Conductor Selection (AAAC / ACSR / HTLS)
  7. Ground Wire / OPGW (Optical Ground Wire) Design
  8. Insulator String Design (Disc / Polymer / Composite)
  9. Sag-Tension Calculations & Stringing Charts
  10. Right of Way (ROW) Planning & Clearance Analysis
  11. Foundation Design for Towers & Poles
  12. Line Protection & Relay Coordination
  13. Transmission Line Loss & Voltage Drop Studies
  14. Stringing, Testing & Commissioning Support
Substation_design
power-electrical-

Engineering & Design

Substation & Switchyard (AIS / GIS)

  1. Primary System Engineering (EHV, HV/MV Equipment & Power Path)
  2. Secondary System Engineering (Protection, Control & Automation)
  3. Package Substations
  4. Compact Substations
  5. Unitized / Skid-Mounted Substations
  6. E-House (Electrical House / Modular Electrical Enclosure)
  7. Engineered Building Solutions (EBS)

Substation & Switchyard (AIS / GIS)

  1. GIS / AIS Substation Layouts
  2. Equipment Layouts & Clearance Studies
  3. Cable Routing & Trench Layouts
  4. Control Room & Panel Layouts
  5. Earthing & Grounding Grid Design
  6. Lightning Protection System Design
  7. Illumination & Lighting Layouts (Substation/Plant)
  8. Fire Detection & Safety Layout Integration
substation

Engineering & Design

Substations & Switchyard ( AIS, GIS)

Protection, Control & Schematics

  • Protection & Control Schematics
  • AC / DC Schematic Diagrams
  • Single Line Diagrams (SLD) & Three-Line Diagrams
  • Interlocking & Logic Diagrams
  • Control & Relay Panel Schematics
  • SCADA Architecture & Interface Diagrams
  • Communication & Signal Schematics

Cable & Routing Engineering

  • Cable Schedules (Power, Control & Instrumentation)
  • Cable Routing & Trench Layouts
  • Cable Tray & Ladder Design
  • Cable Sizing, Derating & Ampacity Studies
  • Termination & Interconnection Schedules
AIS-GIS

Engineering & Design

Substations & Switchyard ( AIS, GIS)

System Studies & Calculations

  1. Load Flow Studies
  2. Short Circuit Studies
  3. Voltage Drop Calculations
  4. Protection Coordination Studies
  5. Arc Flash Studies
  6. Cable Sizing Calculations
  7. Busbar / Conductor Sizing
  8. Battery Sizing Calculations
  9. Earthing / Grounding System Calculations
  10. Transformer Sizing & Selection Studies

Equipment Selection & Engineering BOQ

  1. Selection of Power & Distribution Transformers
  2. MV / LV Switchgear Selection
  3. Control & Relay Panels Selection
  4. UPS & DC System Selection
  5. CT / PT (Instrument Transformer) Selection
  6. Protective Relay Selection
  7. VFD / Drive System Selection
  8. BOQ (Bill of Quantities) & Material Take-Off (MTO)
electrical_equipment

Engineering & Design

Electrical Equipment Engineering (Selection & Sizing)

  1. Bus Ducts & Busbar Trunking Systems
  2. Cable Trays, Cable Ladders, Raceways & Conduits
  3. Power Cables, Control Cables & Cable Accessories
  4. AIS (Air Insulated Switchgear)
  5. GIS (Gas Insulated Switchgear)

Circuit Protection & Switching Devices

  1. ACB (Air Circuit Breakers)
  2. VCB (Vacuum Circuit Breakers)
  3. SF6 Circuit Breakers
  4. MCCB (Moulded Case Circuit Breakers)
  5. MCB (Miniature Circuit Breakers)
  6. ELCB / RCCB / RCBO
  7. Switch Fuse Units (SFU)
  8. Isolators & Load Break Switches
  9. Protective & Numerical Relays

Power Quality & Compensation

  1. Capacitor Banks
  2. Harmonic Filters
  3. Surge Protection Devices (SPD)
electrical_automation_energy_power

E-House (Electrical House)

  1. E-House (Electrical House)
    (Pre-fabricated, Modular Enclosure that contains critical electrical and power distribution equipment. It’s essentially a ready-to-deploy “power room” built off-site and installed near or alongside a data center)
  2. Modular Electrification Enclosure
  3. Engineered Building Solutions (EBS)
  4. Electrical Cabinets & Enclosures

Electrical Equipment Engineering (Selection & Sizing)

Transformers & Power Equipment

  1. Power & Distribution Transformers
  2. Dry-Type & Oil-Immersed Transformers
  3. Instrument Transformers (CTs, PTs / VTs)
  4. Diesel Generator (DG) Sets
  5. AC & DC Power Systems

Motors & Drives

  1. LT & HT Motors
  2. Variable Frequency Drives (VFD)
  3. Soft Starters
  4. Servo Drives
  5. Thyristor / Power Electronic Control Systems

Control, Automation & Monitoring

  1. PLC Systems, SCADA Systems, HMI, DCS
  2. Industrial Automation Hardware
  3. Energy Management & Metering Systems

Auxiliary & Infrastructure Systems

  1. UPS Systems (Industrial & Critical Power)
  2. Battery Chargers & Battery Systems
  3. Insulators & Busbar Supports
  4. Earthing & Lightning Protection Systems
  5. Lighting & Illumination Systems
Distribution_system

Engineering & Design

Panels & Distribution Systems

  1. Electrical Control Panels
  2. Power Control Centers (PCC)
  3. Motor Control Centers (MCC )
  4. Distribution Boards (DB)
  5. Switchboards & Panel Boards
  6. LV / MV / HV Switchgear Panels
  7. GIS / AIS Switchgear Systems
  8. Ring Main Units (RMU)
  9. Feeder Pillars & Distribution Kiosks
  10. Automatic Transfer Switches (ATS)
  11. Synchronization & Load Sharing Panels
  12. APFC / Capacitor Bank Panels
  13. VFD & Soft Starter Panels
  14. PLC & SCADA Control Panels
  15. Relay & Protection Panels
  16. Metering & Energy Management Panels
  17. ACDB / DCDB Panels
  18. UPS & Critical Power Distribution Panels
  19. Battery Charger & DC Systems
  20. Junction Boxes (JB) & Marshalling Boxes
  21. Bus Ducts & Busbar Trunking Systems
  22. Control Desks & Operator Consoles
  23. Cabinets, Enclosures & Outdoor Panels
BESS
smart_grid

Engineering & Design

Energy Storage & Battery Systems

  1. Battery Energy Storage System (BESS)
  2. Power Electronics (Energy Storage)
  3. Battery Systems Electrical
  4. Energy Storage Grid Integration
  5. Energy Storage System (ESS)
  6. UPS

Smart Grid

  1. Smart Grid Architecture & System Integration
  2. Advanced Metering Infrastructure (AMI) / Smart Metering
  3. Distribution Automation (DA)
  4. SCADA / DMS Integration for Grid Monitoring & Control
  5. Energy Management System (EMS) / Load Management
  6. Outage Management System (OMS)
  7. Renewable Energy & Battery Storage (BESS) Grid Integration
  8. Power Quality Monitoring & Real-Time Analytics

Engineering & Design

Earthing, Grounding & Bonding

  1. Substation Earthing System Design (Grid / Mesh / Mat Earthing)
  2. Plant / Facility Grounding System Design
  3. Equipment Earthing (Transformers, Switchgear, Generators, Motors)
  4. Neutral Grounding Systems (NGR / NGT / Solid / Resistance Grounding)
  5. Lightning Protection System Earthing Integration
  6. Earth Resistance & Step / Touch Potential Calculations
  7. Grounding Conductor Sizing & Layout Design
  8. Bonding of Metallic Structures & Equipment Frames
  9. Cable Tray, Raceway & Structural Bonding
  10. Transformer Neutral Earthing & Earthing Transformer Systems
  11. Earthing for Control Rooms, E-Houses & Panels
  12. Surge Protection Earthing (SPD Coordination)
  13. Earthing for HV / MV / LV Systems Integration
  14. Earthing Testing, Measurement & Commissioning (Earth Pit Testing, Soil Resistivity)

Engineering & Design

Lighting Systems

  1. Illumination Layout Design (Indoor, Outdoor & Area Lighting)
  2. Lux Level Calculations as per IEC / IS Standards
  3. LED Lighting Systems
  4. Emergency Lighting & Exit Signage Systems
  5. Control Systems (Timers, Photocells, Motion Sensors, Smart Lighting Control)
  6. Lighting for Control Rooms, Switchyards, E-Houses & Buildings
  7. Hazardous Area Lighting (Flameproof / Explosion-Proof Fixtures)
  8. High Mast Lighting Systems Design & Installation
  9. Lighting Power Distribution (LDB / Lighting Panels Integration)
  10. Lighting Earthing & Safety Integration
  11. Energy-Efficient Lighting Design & Optimization
cabling_systems

Engineering & Design

Cabling Systems

  1. Power, Control & Instrumentation
  2. Cable Selection, Sizing & Derating Studies
  3. HV / MV / LV Power Cable Engineering
  4. Control, Instrumentation & Communication Cables
  5. Cable Routing Design (Trays, Ladders, Conduits & Duct Banks)
  6. Cable Tray / Ladder System Design & Load Calculations
  7. Underground Cable Network Design (Trenching & Burial Layouts)
  8. Cable Pulling, Laying & Installation Methodology
  9. Cable Termination & Jointing (Indoor / Outdoor / Heat Shrink / Cold Shrink)
  10. Cable Schedule Preparation & Interconnection Diagrams
  11. Cable Tray Earthing & Bonding Integration
  12. Cable Identification, Tagging & Ferruling Systems
  13. Fire-Resistant & Flame-Retardant Cable Systems
  14. Fiber Optic Cable Routing (for SCADA / Communication Systems)
  15. Cable Fault Detection & Diagnostics
AEC1

Engineering & Design

MEP Engineering

Mechanical, Electrical & Plumbing (MEP) professionals specializing in 

HVAC, electrical systems, plumbing, fire protection, ELV, BMS, building automation, energy management, BIM coordination,

 fire & life safety.

Engineering & Design

Fire Protection & Safety

  1. Fire Detection & Alarm Systems (FDAS)
  2. Very Early Smoke Detection Apparatus (VESDA)
  3. Clean Agent Fire Suppression Systems (FK-5-1-12, FM-200, Inert Gas)
  4. Double Interlock Pre-Action Sprinkler Systems
  5. Wet & Dry Riser Systems
  6. Hydrant Systems
  7. Fire Pumps & Water Storage Tanks
  8. Emergency Voice Alarm & Communication Systems (EVACS)
  9. Emergency Lighting & Exit Signage
  10. Smoke Management & Control Systems
  11. Fire Command Center Integration

Energy Monitoring, Automation, Control & Instrumentation Engineering & Design

building_management_system
SGADA

Building & Infrastructure Automation

  1. Intelligent Building Management Systems (IBMS))
  2. Building Automation Systems (BAS)
  3. HVAC Automation & Control Systems
  4. Lighting Control Systems
  5. Access Control & Security Integration Systems

Drives & Motion Control

  1. Variable Frequency Drives (VFD)
  2. Industrial Drives & Motion Control Systems
  3. Servo Drives & Servo Motors
  4. Soft Starters
  5. Motor Control Centers (MCC)

Power & Utility Control Systems

  1. Turbine Control Systems
  2. Generator Control & Synchronization Systems
  3. Substation Automation Systems (SAS)
  4. Energy Management Systems (EMS)
  5. Load Management & Demand Control Systems
  6.  

Building & Infrastructure Automation

  1. Intelligent Building Management Systems (IBMS))
  2. Building Automation Systems (BAS)
  3. HVAC Automation & Control Systems
  4. Lighting Control Systems
  5. Access Control & Security Integration Systems

Energy Monitoring, Automation, Control & Instrumentation Engineering & Design

Energy Monitoring Systems

  1. Electrical Power Monitoring Systems (EPMS)
  2. Smart Metering Systems
  3. Building Energy Management Systems (BEMS)
  4. Industrial Energy Monitoring Systems (IEMS)
  5. Home Energy Management Systems (HEMS)
  6. Renewable Energy Monitoring Systems
  7. IoT-Based Energy Monitoring Systems
  8. Power Quality Monitoring Systems
  9. Utility Energy Monitoring & Billing Systems

Automation & Control Systems

  1. Process Automation Systems
  2. Industrial Automation Systems
  3. Supervisory Control and Data Acquisition (SCADA)
  4. Distributed Control Systems (DCS)
  5. Programmable Logic Controllers (PLC)
  6. Human Machine Interface (HMI)
  7. Manufacturing Execution Systems (MES)
  8. Industrial Internet of Things (IIoT) Systems
  9. Remote Terminal Units (RTU)
  10. Industrial Communication Networks

ELV SYSTEMS

Engineering & Design

Security Systems

Fire & Life Safety Systems

Communication & Infrastructure Systems

Monitoring & Control Systems

Field & Sensor Systems

Energy & Synchronization Systems

Integrated Command & Management Systems
AV / Control Room Systems

civil_structure

Civil & Structural Engineering & Design

Electrical Infrastructure Civil Works

  1. AIS/GIS Substation Civil & Structural Design
  2. Transmission & Distribution Line Civil & Structural Designs
  3. Transformer, Switchgear & Equipment Foundations
  4. DG Building & Generator Foundations
  5. E-House / Electrical House Foundations
  6. UPS & Battery Room Civil & Structural Works
  7. Cable Cellars, Trenches & Duct Banks
  8. Utility Equipment Pads & Foundation Systems

Civil Design & Layout Engineering

  1. Substation & Electrical Yard Layouts
  2. Equipment Foundation Layouts
  3. Cable Trench & Utility Corridor Layouts
  4. Internal Access Roads & Hardstands
  5. Drainage & Stormwater Systems
  6. Fire Water Infrastructure Coordination

Civil & Structural Engineering & Design

Structural Engineering

  1. RCC & Structural Steel Design
  2. Equipment Support Structures
  3. Gantry Structures
  4. Cable Tray & Cable Rack Support Structures
  5. Pipe Rack & Utility Support Structures
  6. Seismic & Wind Load Analysis
  7. Structural Stability Assessments

Electrical Buildings & Modular Infrastructure

  1. Control Rooms & Electrical Buildings
  2. DG, UPS & Battery Buildings
  3. E-House / Prefabricated Electrical Buildings
  4. Fire-Rated Walls & Blast Walls (where applicable)
  5. Equipment Access & Maintenance Provisions
civil_structural

Civil & Structural Engineering & Design

BOQ & Engineering Support

  1. Bill of Quantities (BOQ) & Material Take-Offs (MTO)
  2. Cost Estimation
  3. Vendor & Shop Drawing Reviews
  4. Construction Engineering Support
  5. As-Built Documentation
  6. Surveyors
  7. QA/QC

Design Calculations

  1. Foundation Design Calculations
  2. Structural Analysis & Design Reports
  3. Equipment Load & Anchor Bolt Calculations
  4. Earthwork & Drainage Calculations
  5. Seismic & Wind Design Calculations
supply_chain

Supply Chain & Procurement

  1. Strategic sourcing and vendor development
  2. Vendor prequalification and evaluation
  3. RFQ/RFP preparation and bid management
  4. Techno-commercial bid analysis
  5. Purchase order and contract management
  6. Procurement planning and scheduling
  7. Expediting and vendor coordination
  8. Quality inspection and factory acceptance testing (FAT)
  9. Logistics and transportation management
  10. Customs clearance and import coordination
  11. Warehousing and inventory management
  12. Material tracking and site delivery coordination
  13. Supply chain risk management
  14. Cost optimization and procurement control
  15. Compliance with project specifications
construction_management_building_installation

Construction Management, Build & Installation

  1. High Voltage (EHV, HV) Systems (Grid Connectivity, Substations)
  2. Medium Voltage (MV) Systems
  3. Low Voltage (LV) Power Distribution (Panels, Switchgear, DBs & Cabling)
  4. Power Distribution Systems (PCC, MCC, Switchboards)
  5. UPS Systems & Battery Backup (Industrial & Critical Power)
  6. Diesel Generator (DG) Systems & Emergency Power
  7. Power Distribution Units (PDUs) & Critical Load Distribution
  8. Cable Installation (Power, Control, Instrumentation & Grounding Cables) 
  9. Cable Management Systems (Trays, Ladders, Conduits & Raceway Installation)
  10. Transformer Installation & Commissioning (Power & Distribution Transformers)
  11. Earthing & Grounding System Installation
  12. Lightning Protection System Installation
  13. Lighting & Illumination Systems Installation
  14. Bus Duct & Busbar Trunking Installation
  15. Substation & Switchyard Erection (AIS/GIS)
quality_assurance

QA/QC – Quality Assurance & Quality Control

Quality Assurance & Quality Control (QA/QC)

Inspection & Test Plans (ITP)

Standards, Codes & Regulatory Compliance

Inspection & Testing

Document Control & Traceability

Non-Conformance Reporting (NCR) & Corrective Actions

Quality Audits & Compliance Management

EHS

EHS/HSE

Environment, Health & Safety (EHS/HSE) Management

Construction EHS / HSE

Engineering & Design Safety

Procurement & Vendor EHS Management

Commissioning & Start-Up EHS

Electrical Safety

Mechanical & Critical Infrastructure Safety

Contractor & Subcontractor Safety Management

Fire & Life Safety

Permit-to-Work (PTW) & SIMOPS Management

Risk Assessment & Process Safety

Environmental Compliance & Sustainability (ESG)

Emergency Preparedness & Crisis Management

Regulatory Compliance & EHS Governance

EHS Audits, Inspections & Incident Management

EHS Training, Competency & Safety Culture

EHS Digital Systems, Monitoring & Reporting

Handover, Operational Readiness & EHS Close-Out

pre-commisioning-testing

Pre-commissioning, Testing Commissioning and Start-up

Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT)

Pre-Commissioning Checks & Inspections

Insulation Resistance, Hi-Pot & Earth Testing

Relay Testing & Protection System Validation

Power System Commissioning (Switchgear, Transformers, DG, UPS)

Cable Testing (IR, VLF, Sheath & Continuity Tests)

Integrated Systems Testing (IST) – Electrical & Control Systems

Grid Synchronization & Energization

Performance Testing & Reliability Trials

As-Built Verification & Commissioning Documentation

We support to hire the candidates with experience in Various ELECTRICAL STANDARDS for Products and Systems Design, Architecture, Draft, Development, Testing, V&V, Integration, Installation & Commissioning, Maintenance

Electrical Standards:  
  1. IS – INDIAN STANDARDS ( INDIA) (BIS)
  2. IEC – INTERNATIONAL ELECTROTECHNICAL COMMISSION (INTERNATIONAL)
  3. NFPA – NATIONAL FIRE PROTECTION ASSOCIATION (USA)
  4. NEC – NATIONAL ELECTRICAL CODE  (USA)
  5. ASTM – AMERICAN SOCIETY FOR TESTING AND MATERIALS (USA)
  6. NEMA- NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (USA)
  7. ANSI- AMERICAN NATIONAL STANDARD INSTITUE (USA)
  8. IEEE – INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (INTERNATIONAL)
  9. ISO – INTERNATIONAL ORGNAIZATION FOR STANDARDIZATION (INTERNATIONAL)
  10. UL – UNDERWRITERS LABORATORIES (USA)
  11. CENELAC – EUROPEAN COMMITTEE FOR ELECTROTECHNAICAL STANDARDIZATION (EUROPE)
  12. BS – BRITISH STANDARD (IET/BSI) (UK)
  13. CEC – CANADIAN ELECTRICAL CODE (CANADA)
  14. CSA  – CANADIAN STANDRDS ASSOCIATION (CANADA)
  15. AS/NZS – AUSTRALIAN/NEW ZEALAND STANDARDS
  16. NF – FRENCH STANDARDS (FRANCE)
  17. DIN VDE – DEUTSCHES INSTITUE FUR NORMUNG/VERBAND DER ELEKTROTECHNIK (GERMANAY)
  18. EN – EUROPEAN NORMS  (EUROPE)                            
  19. CENELAC – EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (EU)
  20. CEN – EUROPEAN COMMITTEE FOR STANDARDIZATION (EU)
  21. JIS – JAPANESE INDUSTRIAL STANDARD (JAPAN)
  22. GB – GUOBIAO ( CHINA) (SAC)
  23. SANS – SOUTH AFRICAN NATIONAL STANDARD (SOUTH AFRICA)
  24. NOM –  NORMA OFICIAL MEXICANA (MEXICO)
  25. NBR – NORMA BRASILERIA (BRAZIL)
  26. GOST – GOSUDARSTVENNYY STANDART ( RUSSIA)
power_electonics

Power Electronics

Experience in:  

Product Designers, System Architects, Hardware Designers, Testing

Power Electronics, SMPS, UPS, PCB, AC/DC, DC/AC, DC/DC Converters, Inverters, Drivers, VFD, PLC, Microcontrollers, Power Management, Power Supply, Inductors, Chokes, Current Sensors, EMC Filters, Memories, Relays, RF, MOSFET, IGBT, DIODES, EV Charging, Smart Energy Meters, Gas Meters, Water Meters, etc

Information Technology

Developers (C, C++,  .Net, Java/PLSQL/Angular, HTML, Python, Powershell, Data and Analytics, SAP, Oracle, Mulesoft, Sharepoint/Office365 etc)

Administrators (Backup, Storage, Database, SCCM, Windows, Cloud, Azure, AWS, Oracle etc)

Production support and maintenance.

Architects

System Engineers

Verification & Validation

cloud_solutions

Cloud Solutions, Cloud Computing and Cloud Infrastructure

Experience in:  

GCP specific tools like Google Cloud Storage

Big Lake, Big Query, Cloud Composer, Terra form

Public Cloud Platforms (AWS, Azure, GCP, DevOps)

DevOps Automation Tools like – Puppet, Chef, and Ansible

Cloud Computing services for IaaS, Paas, SaaS

Feel Free To Reach Out To Us We Always Open To Discuss

RALICOMM is headquartered at Hyderabad, we recruit for leading organizations for various sectors to serve them for their various Manpower requirements.

Read More >>

QUICK LINKS

OUR SERVICES

INDUSTRIES WE SERVE

Copyright 2026 © RALICOMM. All Rights Reserved.